Sony CMT-SE9 Operating Instructions Manual page 36

The default settings are underlined.
FRONT
CENTER
SURROUND
SUBWOOFER YES
Notes
• When adjusting speakers, the sound may cut off for a
moment.
• Depending on the settings of other speakers, the
subwoofer may output excessive sound.
Specifying the surround speaker
position and height
When setting the surround speakers, refer to the
diagram and select "SURROUND".
The default setting is underlined.
BEHIND (LOW)
BEHIND (HIGH)
SIDE (LOW)
SIDE (HIGH)
36 GB
YES
YES
BEHIND (LOW), BEHIND
(HIGH), SIDE (LOW), SIDE
(HIGH): Specify the position and
height to implement the Digital
Cinema Surround modes.
Select this if the surround
speakers are located in section
B and D.
Select this if the surround
speakers are located in section
B and C.
Select this if the surround
speakers are located in section
A and D.
Select this if the surround
speakers are located in section
A and C.
Position diagram
Height diagram
x DISTANCE
The default distance setting for the speakers in
relation to the listening position is shown below.
3m
3m
3m
Be sure to change the value in the Setup Display
when you move the speakers.
The default settings are underlined.
FRONT Front speaker distance from the
3.0 m listening position can be set in
0.2 meter increments from 1.0 to
7.0 meters.
CENTER Center speaker distance can be moved
3.0 m up to 1.6 meters closer to the listening
position, from the front speakers in
0.2 meter increments.
SURROUND Surround speaker distance can be
3.0 m moved up to 4.6 meters closer to the
listening position, from the front
speakers in 0.2 meter increments.
3m
3m