Sony CMT-SE9 Operating Instructions Manual page 73

9
Set the time to start playing.
Press . or >
hour, then press ENTER.
The minute indication flashes.
Press . or >
minute, then press ENTER.
10
Set the time to stop playing following
the same procedure as step 7 to 9.
11
Press . or > repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
t TUNER y DVD PLAY T
t TAPE PLAY y MD PLAY T
12
Press ENTER.
The timer settings appear, then the original
display returns.
13
Press ?/1 to turn off the system.
Other operations
To Do this
1
Check the setting/ Press CLOCK/TIMER
active the timer SELECT.
2
Press
repeatedly until "TIMER
SELECT?" appears, then
press ENTER.
3
Press
repeatedly until "PLAY
ON?" appears, then press
ENTER.
Change the setting Start over from step 1.
1
Cancel the timer Press CLOCK/TIMER
SELECT.
2
Press
repeatedly until "TIMER
OFF?" appears, then press
ENTER.
repeatedly to set the
repeatedly to set the
. >
or
. >
or
. >
or
Notes
• If you use the Play Timer and the recording timer at
the same time, the recording timer has priority.
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The system turns on 30 seconds before the preset
time. Do not operate the system from the time the
system turns on until the play starts.
• If the system is on 30 seconds before the preset time,
the Play Timer will not be activated.
• You cannot use the optional component connected to
VIDEO/SAT IN or VIDEO/SAT DIGITAL IN
OPTICAL jacks as the sound source for Play Timer.
GB
73