Extron electronics MGP Pro Series User Manual page 91

MAC Address field
The Media Access Control (MAC) Address consists of six hexadecimal character pairs
and is used to identify the processor hardware. This address is hard-coded in the unit and
cannot be changed.
Date/Time settings fields
The Date/Time Settings section provides a location for viewing and setting the time
functions.
Figure 33. Date/Time Settings Section
To change the date and time settings:
1. Click the drop box for the desired variable. The adjustable variables are month, day,
year, hours, minutes, am or pm, and (time) zone. A drop-down scroll box appears (the
drop box is selected in figure 33).
Month
2. Click and drag the slider or click the
until the desired variable is visible.
3. Click on the desired variable.
NOTES:
If setting the time, set the local time. The
•
the offset from Greenwich Mean Time (GMT).
• The field identifies the standard time zone that has been selected and
Zone
displays the amount of time, in hours and minutes, that the local time varies
from the GMT international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. Select the appropriate
select .
Off
NOTE: When daylight saving time is enabled, the MGP Pro updates its internal
clock between Standard Time and Daylight Saving Time in the spring and fall on
the date that the time change occurs in the United States of America and parts of
Europe and Brazil. When daylight saving time is turned off, the processor does not
adjust its time reference.
6. Click the button at the bottom of the
Submit
implement your selections.
Scroll Up
Zone
radio button. To turn off daylight saving time,
Daylight Saving
Date/Time Settings
MGP Pro Series • HTML Configuration and Control
button or button
Scroll Down
variable allows you to then enter
section to
83