Labelling The Preset Stations; Station Name - Sony CMT-SP55MD Operating Instructions Manual

Tips
• You can switch from another source to the tuner
just by pressing TUNER/BAND on the tuner
(Automatic Source Selection).
• To improve broadcast reception, adjust the supplied
aerials, or connect a commercially available
external aerial (see page 60).
• When an FM stereo programme has static noise,
press STEREO/MONO on the remote until
"MONO" appears. When receiving a monaural
broadcast, "MONO" lights up in the display. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.
Labelling the preset
stations

— Station Name

You can label each preset station with up to 12
characters (Station Name). The Station Name
appears when you tune in the station.
2
4,5
CURSORT
3,6
1
1
Press BAND TUNER repeatedly to
select "AM" or "FM".
2
Press TUNING MODE repeatedly until
"PRESET" appears.
3
Press . or > repeatedly until the
desired preset station to label appears.
`/1
9
CLEAR
7
3,6
continued
49