Sony CMT-SP55MD Operating Instructions Manual page 40

Erasing recordings (continued)
3
m
4,6,10
2
1
1
Press MD to switch the function to MD.
2
While playing an MD, press X at the
starting point of the portion to be erased
(point A).
The MD deck pauses for play.
3
Press MENU/NO to display "MD
Edit Menu".
4
Press . or > repeatedly until
"MD A-B Erase ?" appears, then press
ENTER/YES.
5
Press ENTER/YES again.
"MD - Rehearsal -" and "MD Point A ok?"
appear alternately while the deck plays the
selected track from the beginning to point A.
40
`/1
4,5,8
9,11
M
4,6,10
6
While monitoring the sound, press .
or > repeatedly to find the starting
point of the portion to be erased (point
A).
You can shift the starting point by 1/86
second (1 frame) intervals.
To shift the point by second or minute
intervals, press m or M so that "s" or
"m" flashes, then press . or >.
7
Repeat step 6 until point A is played
correctly.
8
Press ENTER/YES if point A is correct.
"MD Point B Set" appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
9
Continue playback until the deck
reaches point B, then press ENTER/
YES.
"MD A-B Ers" and "MD Point B ok?"
appear alternately and the deck repeats a
portion of the few seconds before point A
and after point B successively.
10
Press . or > repeatedly to find
point B.
The procedure is the same as step 6.
11
Press ENTER/YES if point B is correct.
"MD Complete!!" appears for a few seconds
and the portion between point A and B is
erased.
To cancel A-B Erase
Press MENU/NO before completing the
procedure.