Erasing Recordings - Erase Function - Sony CMT-SP55MD Operating Instructions Manual

Erasing recordings
— Erase Function
The MD deck lets you erase unwanted tracks
quickly and easily. You can restore the contents to
the condition before erasing (unerase) by using the
Undo function. Note, however, you cannot undo
an edit after performing any additional edits.
The three options for erasing recordings are:
• Erasing a single track (Track Erase function)
• Erasing all tracks (All Erase function)
• Erasing a portion of a track (A-B Erase
function)
Erasing a single track
— Track Erase function
You can erase a track simply by selecting its track
number. When you erase a track, the total number
of tracks on the MD decreases by one and all the
tracks following the erased one are renumbered.
Example: Erasing track 2.
Track
number
1
Original
A
tracks
1
After
A
ERASE
When erasing multiple tracks, you should proceed
in order from high to low track number to prevent
the renumbering of tracks that have not been
erased yet.
38
Erase track 2
2 3 4
B C D
2 3
C D
2
3,4
1
1
Press MD to switch the function to MD.
2
Press MENU/NO to display "MD Edit
Menu".
3
Press . or > repeatedly until
"MD Tr Erase ?" appears, then press
ENTER/YES.
4
Press . or > repeatedly until the
desired track number appears.
5
Press ENTER/YES.
"MD Complete!!" appears for a few seconds
and the selected track and title are erased.
`/1
3,5
3,4