Timer Recording Radio Programmes - Sony CMT-SP55MD Operating Instructions Manual

Timer recording radio
programmes
To timer record, you must first preset the radio
station (see page 46) and set the clock (see
page 8). You can make a timer recording of a
radio programme or the audio signal from a digital
component connected to AUX IN (see page 57).
3–6
1
Prepare the sound source you want to
play.
• Radio: Tune in the preset radio station (see
page 48).
• AUX: Set the timer of the component
connected to DIGITAL OPTICAL AUX
IN. For details, refer to the operating
instructions of the connected component.
2
Press CLOCK/TIMER SET.
3
Press . or > repeatedly until
"SET MD REC" (or "SET TAPE REC"
when using the optional tape deck TC-
SP55) appears, then press ENTER/YES.
The hour indication flashes.
54
`/1
8
2
3–6
3–6
4
Set the time to start recording.
Press . or > repeatedly to set the hour,
then press ENTER/YES.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER/YES.
The hour indication flashes again.
5
Set the time to stop recording following
the procedure in step 4.
"OFF TIME NG" appears if the start time
and the stop time settings are the same.
Change the stop time.
6
Press . or > repeatedly to select
the recording source, then press
ENTER/YES.
The indication changes as follows:
When recording on an MD
t TUNER c MD
r
TUNER c MD (M)*
r
AUX** c MD
r
AUX c MD (M)
* When you record onto an MD in monaural
format.
** You can select the connected component for
recording source. Set the timer on both
systems to the same time.
When recording on a tape with the optional
tape deck TC-SP55
t TUNER c TAPE
r
AUX c TAPE