Dividing Recorded Tracks; Divide Function - Sony CMT-SP55MD Operating Instructions Manual

Moving recorded tracks
(continued)
3
Press . or > repeatedly until
"MD Move ?" appears, then press
ENTER/YES.
4
Press . or > repeatedly until the
desired track number to move appears,
then press ENTER/YES.
5
Press . or > repeatedly until the
new track position appears.
6
Press ENTER/YES.
"MD Complete!!" appears for a few seconds
and the selected track moves to the appointed
position.
To cancel moving
Press MENU/NO before completing the
procedure.
To return to the track order
before Move
You can return to the original track order
immediately after moving recorded tracks by
using the Undo function (see page 45).
42
Original track New track
number position

Dividing recorded tracks

— Divide Function

You can use this function to mark track numbers
after recording. The total number of tracks
increases by one and all the tracks following the
divided ones are renumbered.
Example: Dividing track 2 into two tracks.
Track
number
1 2
Original
A B
tracks
1 2
After
A B
DIVIDE
2
m
3,4,5
1
3
C D
Divide track
2 into track B
and C
3 4
C D
`/1
3,4,6
M
3,4,5