Hohem iSteady Multi User Manual page 7

Balancing
It is recommended to turn on the camera before balancing it on the gimbal.
3.Balance the camera through left and right
Slide the roll arm to balance
the camera through left and right,
tighten the thumb screw after
the camera is well balanced.
2.Balance the camera
through up and down
Rotate the tilt axis so that the
camera lens is pointing forward,
balance the camera through up
and down by sliding the tilt arm
and tighten the thumb screw
after the camera is well balanced.
3
2
1
06
1. Balance the camera
2.through front and back
Slide the quick release plate through
front and back to balance the camera,
tighten the thumb screw after the
camera is well balanced.