Calibration Instruction - Hohem iSteady Multi User Manual

3-axis stabilizing gimbal for compact digital camera

Hide thumbs Also See for iSteady Multi:

Table of Contents

Calibration

It requires to calibrate the gimbal if you notice it is not work properly as below.

1. The pitch angle is not level with the horizontal surface.

2. The roll angle is not parallel to the horizontal surface.

3. The pan axis drifts when the gimbal is on all lock mode.

Calibration Instruction

Method 1：Off-line Calibration

（1）Power on the gimbal, long press the mode button over 6 seconds till the mode light on.

（2）Laying the gimbal on a static flat surface without any vibrate. Calibration is completed

once the mode light flash twice.

Method 2：6-Side Calibration Via App

Please make sure the gimbal is connected with app via bluetooth successfully, then enter

"Calibration" and follow the instruction in the app to calibrate the gimbal.

*if the off-line calibration is not

useful, please refer to 【Method 2】

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the iSteady Multi and is the answer not in the manual?