Hohem iSteady Multi User Manual page 13

App "Hohem Gimbal" Instruction
Other App Functions
1.Gimbal Specs Setting：
A.Following Speed （To adjust the following speed of pan/tilt/roll axes）
B.Joystick Speed （To adjust the rotating speed by control the joystick）
C.Following Dead Area（No following movement when the rotate angle is less than dead area setting）
D.Trim（To adjust the tilt/roll axis in small angle to get a perfect balance）
E.Joystick Reverse（To reverse the rotation direction by control the joystick）
F.Motor Torsion（To adjust the motor torsion of pan/tilt/roll axes, which is useful to solve the vibrate
issue due to lightweight or over weight mobile phone）
2. Firmware Upgrade：The firmware is subject to upgrade without a fixed schedule. Firmware
upgarde is help to optimize the working of gimbal, please refer to page 14 for details.
3. Calibration：It requires to calibrate the gimbal only when you notice any kind of not level or drift
on any of the axes, please refer to page 13 for details.
4.Operation Instruction：For any questions, please refer to the user guide for details, the content is
subject to change without prior notice.
12