Programing The Cd Tracks; Program Play - Sony CMT-EP404 Operating Instructions Manual

Programing the CD tracks

— Program Play

You can make a program of up to 32 tracks in
the order you want them to be played.
1
Press CD, then place a CD.
2
Press PLAY MODE (PLAY MODE/RDS/
DIR on the remote) repeatedly until
"PROGRAM" appears in the display.
3
Turn ./ > clockwise or
counterclockwise (or press . or >
on the remote) until the desired track
appears in the display.
Preset number
Selected track number
(including selected track)
4
Press ENTER.
The track is programed. The program step
number appears.
5
To program additional tracks, repeat
steps 3 to 4.
6
Press nN (CMT-EP505) or N (nN
on the remote, CMT-EP404).
Program Play starts.
To Do this
Cancel Program Press PLAY MODE (PLAY
Play MODE/RDS/DIR on the remote)
until "PROGRAM" disappears
from the display.
Add a track to Do steps 3 and 4 with Program Play
the end of the stopped.
program
Press x once, when Program Play
Erase the entire
program is in stop mode, or twice during
Program Play.
Tip
The program you made remains in the system's
memory even after it has been played back. Press CD,
then press nN (CMT-EP505) or N (nN on
the remote, CMT-EP404) to play the same program
again.
GB
9