Tape - Play; Loading A Tape; Playing A Tape; Tape - Recording - Sony CMT-DV2D Operating Instructions Manual

Tape – Play

Loading a tape

1
Press Z PUSH OPEN on the unit.
2
Load a recorded/recordable tape into
the cassette holder.
With the side
you want to
play/record
facing forward.

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press TAPE N.
Other operations
To
Stop play
Fast-forward or
rewind
Switch to TAPE
function from
another source
Cut the sound
Remove a tape
28 GB
Do this
Press x.
Press m or M.
.
Press TAPE N
Playback starts automatically
when a tape is loaded.
Press MUTING.
Press MUTING again or
VOLUME + to restore sound.
Press Z PUSH OPEN on the unit
in stop mode.
Tape – Recording
Recording your favorite
CD tracks on a tape

— CD-TAPE Synchro Recording

You can record a whole CD on a tape.
You can use TYPE I (normal) tape.
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
Press DVD NX and load a disc you
want to record.
3
Press x twice to cancel the Resume
Play.
4
Press CD SYNC.
The tape deck stands by for recording.
"REC" flashes.
5
Press z REC PAUSE/START.
Recording starts.
Tips
• If the tape reaches the end of the front side before
completing the recording, the tape stops
automatically and the CD/DVD player enters
Resume Play mode.
• To continue the recording on the reverse side, press
x twice to first cancel the Resume Play, eject and
reload the tape, then perform steps 1 and 2 of "To
perform Synchro Recording from a desired track"
(page 28). You can then continue Synchro Recording
from the desired track.
To perform Synchro Recording
from a desired track
You can select the first track in Synchro
Recording.
1
After performing steps 1 to 4, press . or
> repeatedly to select the desired track
number.
2
Press z REC PAUSE/START while the
selected track number is flashing.
Recording starts.