Timer Recording Radio Programs; Rec Timer - Sony CMT-DV2D Operating Instructions Manual

Other operations
To Do this
1
Check the setting Press CLOCK/TIMER
SELECT.
2
Press
repeatedly until "PLAY
SELECT" appears, then
press ENTER.
Change the setting Start over from step 1.
1
Cancel the timer Press CLOCK/TIMER
SELECT.
2
Press
repeatedly until "TIMER
OFF" appears, then press
ENTER.
Notes
• You cannot activate the Play Timer and Rec Timer at
the same time.
• If you use the Play Timer and the Sleep Timer at the
same time, the setting with the earlier end time has
priority.
• The system turns on 15 seconds before the preset
time. Do not operate the system from the time the
system turns on until the play starts.
• If the system is on 15 seconds before the preset time,
the Play Timer will not be activated.
• You cannot use the optional component connected to
TV IN L/R jacks as the sound source for Play Timer.
. >
or
. >
or
Timer recording radio
programs

— Rec Timer

You can record a preset radio station from a
specified time.
To timer record, you must first preset the radio
station (see "Presetting radio stations" on
page 25) and set the clock (see "Setting the
clock" on page 11).
Use buttons on the remote for the operation.
1
Press CLOCK/TIMER SET.
2
Press . or > repeatedly to select
"REC SET", then press ENTER.
"ON" appears and the hour indication
flashes.
3
Set the time to start recording.
Press . or >
hour, then press ENTER.
The minute indication flashes.
Press or
. >
minute, then press ENTER.
4
Set the time to stop recording following
the same procedure as step 3.
The type of timer ("REC TIMER"), the start
time, the stop time, and "TUNER REC"
appear in turn, before the original display
returns.
5
Load a recordable tape.
6
Tune in the preset radio station (see
"Listening to a preset station" on
page 26).
7
Press ?/1 to turn off the system.
repeatedly to set the
repeatedly to set the
continued
GB
33