Vol Sensor - Ntron Microx Online User Instruction Manual

1.2.1

%Vol Sensor

A % Volume Electrochemical sensor is an integral part of the Microx Online.
The % Volume measurement range of the Microx Online is factory set at 0 to
25%, with calibration at 20.9% O2.
This model uses Electrochemical technology Sensor which should give
accurate trouble free service during its lifetime. This is a consumptive type
Sensor and as such disposable* and requires regular periodic calibration and
replacement after 1 to 2 years operation(application dependent)
It needs to be ensured that if contaminants are present in the process from
where the sample is being taken, these are prevented from entering the
pipework and sensor.
Contaminants may include particulates or certain heavy vapours. Inline
Filtration of the sample may be required.
*Sensor is not be disposed of into the general waste stream but
disposal should be according to local waste recycling requirements, and due
to hazardous substances being released on destruction of the Sensor, only
approved/certified recyclers should be used for disposal.
Issue: 1.14 Rev. 1.0 Page 3