1.2
Operation
When power is applied to the Microx Online Analyser, an initialisation
procedure is performed as follows:
•
All the display segments are displayed
•
The software version number is displayed
•
The company name is displayed
•
The sensor type is displayed
•
The display then shows the gas level.
The Microx Online is now operational.
Note: The Microx Online Oxygen Monitor is based around the Microx
series of Oxygen Analyser controllers and contains some Menu
programming options which are not relevant to this Microx product and
its mode of operation.
Such menu's and information are highlighted in this user manual as
'Customer Access Not Permitted' and other various warnings against
adjustment of such menu options. Please observe these prohibitions to
ensure correct operation of the Microx Online Oxygen Analyser
The Microx Online Oxygen Analyser is supplied factory configured and
calibrated for correct operation, and apart from sensor replacement and
periodic calibration, should require no further user intervention.
Issue:
1.14
Rev. 1.0
Page 2