Menu 15 - Electronics Zero - Ntron Microx Online User Instruction Manual

4.1.15 Menu 15 – Electronics zero
Disconnect the sensor and place a short at the sensor input to simulate 0%
oxygen.
•
Press the MENU button to open the menu system.
•
Using the NEXT and PREVIOUS buttons select menu option:
E:15
•
Press ENTER.
•
Press ENTER to zero the sensor, '– – – –'will be displayed to
confirm the sensor zero has been performed.
Note: Pressing the MENU button rather than the ENTER
button exits the zero feature without performing the
calibration.
•
Press the MENU button to close the menu system.
Issue: 1.14 Rev. 1.0 Page 21