Before you start!
· All on-screen instructions MUST be followed.
on-screen instructions could cause damage to the machine and the
user.
· Ensure to keep transit hardware in a safe place.
required should the rOTOr HdA require moving.
· During Pad Head removal, always ensure the push cylinder is
cleared before moving away from the carriage.
runs from the carriage arm into The stinger/Pad Head. if either are
not pulled down far enough during removal, the cylinder will catch
and damage the rOTOr HdA.
· Always ensure the power is OFF before changing heads.
the power on can cause a hardware crash.
straying from the
These will be
The push cylinder
Leaving