Playing A Cd - Sony CDP-XE400 Operating Instructions Manual

Basic Operations

Playing a CD

2
See pages 4 – 5 for the hookup
information.
If you turn on the player with
a CD in the tray
You can start playing
automatically from the
beginning of the CD. If you
connect a commercially
available timer, you can start
playing the CD at any time
you want.
You can adjust the output
level with the LINE OUT LEVEL
+/– on the remote (CDP-XE500
only) Z
You can adjust the
headphones volume on the
remote (CDP-XE500 only) Z
Connect the headphones to
the PHONES jack and adjust
the volume with the LINE
OUT LEVEL +/– on the
remote.
6
1
Turn on the amplifier and select the CD player position so that
you can listen to the sound from this player.
2
Press POWER to turn on the player.
3
Press § OPEN/CLOSE,
and place a disc on the
disc tray.
4
Press · .
The disc tray closes and the player plays all the tracks once
(Continuous Play).
Adjust the volume on the amplifier.
To stop playback
Press p.
To
Pause
Resume play after pause
Go to the next track
Go back to the preceding track
Stop play and remove the CD
3 4
With the label side up
You need to
Press P
Press P o r ·
Turn AMS ± clockwise
T u r n A M S ±
counterclockwise
Press § OPEN/CLOSE
Connect the
headphones.