Cleaning & Care - Kogan KAPWDBIDETA Quick Start Manual

Cleaning & Care
Cleaning the Toilet Seat
• Do not use corrosive solvents to clean the toilet seat, such as banana oil, benzene,
decolouriser, cleaner and diluter. Do not use water to rinse the equipment as this
may cause short circuits resulting in a fire.
• Pull out the plug before cleaning; plug or the outlet may get wet by water.
• Scrub the toilet seat gently with a soft cloth. If it is very dirty, wet the cloth and
clean the unit with neutral agents.
Cleaning and Maintaining the Nozzle
• Press the Nozzle Cleaning button and water will spray out. Press the button a
second time then the rear nozzle extends. Press again and the feminine nozzle
extends too.
• Clean the nozzles with a brush.
Replacing the Nozzle (except stainless steel nozzle)
• Hold the front end of the nozzle tip and turn it anticlockwise when nozzle extends.
Then pull it out. Replace the tip, insert into the nozzle and turn it clockwise.
• Do not force the nozzle tip out or bend it.
Cleaning the Filter
When the water pressure is too low or insufficient, please clean the filter.
1. Close the shutoff valve and stop water supply:
Notice: Do not remove the filter without closing the shutoff valve. Otherwise water will spray
out.
17