Kogan KAPWDBIDETA Quick Start Manual page 13

8. Water temp adjustment:
Press this button to adjust water temperature.
If not heating under normal temperature level, switch to another with each press.
High (39°C) > Mid (36°C) > Low (33°C) > Off
Three indicators of the remote control #1, #2, #3 corresponds to the status display.
9. Night light:
Press this button to turn on the light; the indicator #4 will blink on remote control in standby.
Press again to turn off. It can be switched between on and off.
10. Seat temp adjustment:
Press this button to adjust seat temperature.
If not heating under normal temperature level, switch to another with each press.
High (39°C) > Mid (36°C) > Low (33°C) > Off
Three indicators of the remote control #4, #5, #6 corresponds to the status display.
Attention: To prevent the low temperature burn, the 36°C toilet seat will automatically
reduce temperature after sitting on the seat for 10 minutes.
Tip: Standby mode means that the toilet seat is in an operational state. The toilet seat is not
in the state of washing, drying, nozzle self-cleaning, etc.
13