8: Selecting The Front Speaker System - Sony STR-DN1000 Operating Instructions Manual

4
Press GUI MODE.
After "MENU ON" appears on the
display for a while, "GUI" appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
VIDEO 1
Input
VIDEO 2
BD
Music
DVD
Video
SAT
To exit the menu
Press MENU.
38
US
8: Selecting the front
speaker system
You can select the front speakers you want to
drive.
Be sure to use the buttons on the receiver for
this operation.
?/1
2 CH/
PHONES
SPEAKERS A.DIRECT A.F.D. MOVIE MUSIC
SPEAKERS
Press SPEAKERS repeatedly to
select the front speaker system
you want to drive.
To select
The front speakers connected to the
SPEAKERS FRONT A terminals
The front speakers connected to the
SPEAKERS SURROUND BACK/
FRONT B/BI-AMP terminals
The front speakers connected to both
the SPEAKERS FRONT A and
SURROUND BACK/FRONT B/
BI-AMP terminals (parallel
connection)
* To select "SP B" or "SP A + B", set "SB Assign"
to "Speaker B" in the Speaker Settings menu (page
73).
To turn off the speaker output
Press SPEAKERS repeatedly until the "SP A",
"SP B" or "SP A + B" indicators on the display
does not light up. "ALL OFF" appears on the
display for a while.
Note
You cannot switch the front speaker system by
pressing SPEAKERS when the headphones are
connected.
MULTI CHANNEL DECODING MASTER VOLUME
INPUT SELECTOR
MUTING
VIDEO 2 IN
AUTO CAL MIC VIDEO L AUDIO R
INPUT MODE DIMMER DISPLAY
Light up
SP A
SP B*
SP A + B*