Sony STR-DN1000 Operating Instructions Manual page 131

No sound is heard from the S-AIR
product.
• If you use another S-AIR main unit, place
it more than 26 1/4 feet (8 m) away from
this S-AIR main unit.
• Confirm the ID of the S-AIR main unit and
S-AIR sub unit are the same (page 100).
• Confirm the pairing setting (page 102).
• Place the S-AIR main unit and S-AIR sub
unit closer to each other.
• If you are using any equipment that
generates electromagnetic energy such as
a microwave oven near an S-AIR
products, turn off the equipment and try
using the S-AIR product again after
waiting for a short time.
• Place the S-AIR main unit and S-AIR sub
unit separately from other wireless
devices.
• Avoid using any other wireless devices.
• Change the "RF Change" setting (page
105).
• Change the ID settings of the S-AIR main
unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit,
then turn them on again.
• Check that headphones are not connected
to the S-AIR sub unit.
There is noise or the sound skips.
• If you use another S-AIR main unit, place
it more than 26 1/4 feet (8 m) away from
this S-AIR main unit.
• Sources with copyright protection may not
be playable on S-AIR sub unit.
• Place the S-AIR main unit and S-AIR sub
unit closer to each other.
• If you are using any equipment that
generates electromagnetic energy such as
a microwave oven near an S-AIR
products, turn off the equipment and try
using the S-AIR product again after
waiting for a short time.
• Place the S-AIR main unit and S-AIR sub
unit separately from other wireless
devices.
• Avoid using any other wireless devices.
• Change the "RF Change" setting (page
105).
• Change the ID settings of the S-AIR main
unit and S-AIR sub unit.
131 US