Sony STR-DN1000 Operating Instructions Manual page 100

Notes
• Insert the wireless transmitter with the S-AIR logo
facing up.
• Insert the wireless transmitter so that the V marks
are aligned.
• Do not insert other than the wireless transmitter
into the EZW-T100 slot.
3
Use the screws that you removed from
step 1 to fasten the wireless
transmitter.
Note
Do not use other screws to fasten the wireless
transmitter.
To insert the wireless
transceiver into the S-AIR sub
unit
For details on installing the wireless
transceiver into surround amplifier and S-AIR
receiver, refer to the operating instructions
supplied with the surround amplifier and
S-AIR receiver.
100
US
Establishing sound transmission
between the S-AIR main unit and
S-AIR sub unit (ID setting)
When you match the ID of the S-AIR main
unit and the S-AIR sub unit, you can establish
sound transmission. You can use multiple
S-AIR main unit by setting a different ID for
each unit.
2CH/
A.DIRECT A.F.D.
INPUT
RESOLUTION
MODE
DISPLAY
O
HOME
RETURN/
EXIT
MENU
– CATEGORY +
. <
To set the ID of the S-AIR main
unit
1
Press GUI MODE.
After "MENU ON" appears on the display
for a while, "GUI" appears and the GUI
menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
"Settings", then press
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select "S-AIR",
then press or b.
Note
When the S-AIR transmitter (not supplied) is not
inserted into the S-AIR main unit, "S-AIR"
cannot be selected.
4
Press V/v repeatedly to select "S-AIR
ID", then press
The S-AIR ID menu appears.
MOVIE MUSIC
NIGHT
SLEEP MODE
GUI MODE
GUI MODE
V/v/b,
TOOLS/
OPTIONS
MENU
< >
or b.
or b.