Using A Bi-Amplifier Connection - Sony STR-DN1000 Operating Instructions Manual

Recording onto a recording
media
1
Press the input button of the
playback component.
You can also use INPUT SELECTOR
+/– on the receiver.
2
Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
3
Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (connected to
VIDEO 1 OUT jack) for recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
• Only analog input signals are output from the
analog output jack (for recording).
• HDMI sound cannot be recorded.
Using a bi-amplifier
connection
If you are not using surround back speakers,
you can connect the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals using a bi-amplifier
connection.
To connect speakers
Front speaker
(R)
Hi
ANTENNA
AM
IN 4 IN 3
ASSIGNABLE (INPUT ONLY)
COMPONENT VIDEO DMPORT SIRIUS TV DIGITAL (ASSIGNABLE)
Lo
IN 3 IN 2 IN 1 MONITOR DC5V OPTICAL COAXIAL
OUT 0.7A MAX
Y
OPTICAL IN
P B / SAT IN BD IN DVD IN
C
B VIDEO VIDEO VIDEO VIDEO VIDEO
IN IN OUT IN OUT
P /
R C
R
SURROUND BACK/
ASSIGNABLE (INPUT ONLY) FRONT B/
AUDIO AUDIO AUDIO AUDIO
OUT IN IN IN IN OUT IN MONITOR BI-AMP
L L AUDIO R
OUT
R R
SA-CD/CD/CD-R TV SAT BD VIDEO 1
SUBWOOFER
CENTER
SURROUND BACK/
FRONT B/
BI-AMP
R L
SPEAKERS
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/FRONT B/
BI-AMP terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
Front speaker
(L)
Hi
HDMI
(for AUDIO) IN 2 IN 1 OUT
Lo
SURROUND
CENTER
R L
FRONT A
L R L
SPEAKERS
SURROUND
R L
FRONT A
R L
continued
113 US