Adjusting The Equalizer - Sony STR-DG2100 Operating Instructions Manual

Adjusting the equalizer

You can use following parameters to adjust the
tonal quality (bass/treble level) of all speakers,
store up to 5 different equalizer settings, and
apply them. These settings are applied to all
sound fields and for each speaker.
Bass
Level
(dB)
Frequency
(Hz)
Notes
• This function does not work in the following cases.
– The multi-channel input is selected.
– Dolby TrueHD signals with a sampling
frequency of more than 96 kHz are being
received.
• If the equalizer is adjusted while the receiver is
receiving signals with a sampling frequency of
more than 96 kHz, the signals will always be
played back at either 44.1 kHz or 48 kHz.
Treble
1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 38).
2
Press V/v repeatedly to select
"Settings," then press
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
"EQ," then press
1
2-7
OPTIONS
or b.
.
continued
77 GB