Sony STR-DG2100 Operating Instructions Manual page 11

Remote commander
You can use the supplied remote RM-AAP018
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate (page 116).
RM-AAP018
Name Function
A AV ?/1 (on/ Press to turn on or off the audio/
video components that the
standby)
remote is assigned to operate
(page 116).
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (C).
B ?/1 (on/ Press to turn the receiver on or
off.
standby)
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C Input Press one of the buttons to
select the component you want
buttons
to use. Press a pink-labeled
button after pressing SHIFT
(wj). When you press any of the
input buttons, the receiver turns
on. The buttons are factory
assigned to control Sony
components (page 50). You can
program the remote to control
non-Sony components
following the steps in
"Programming the remote"
(page 116).
D TEST TONE Press to output the test tone
from each speaker.
E AMP Press to enable the receiver
operation (page 38).
F MUSIC Press to select sound field
(page 64).
G MOVIE Press to select sound field
(page 64).
continued
11 GB