Sony STR-DG2100 Operating Instructions Manual page 47

Notes
• After reflecting the results of a compensation for a
frequency characteristic, signals with a sampling
frequency of more than 96 kHz are always played
back at either 44.1 kHz or 48 kHz.
• The frequency response measurement result is not
utilized in the following cases.
– The multi-channel input is selected.
– "2ch Analog Direct" is being used.
– Dolby TrueHD signals with a sampling
frequency of more than 96 kHz are being
received.
Tip
The size of a speaker (LARGE/SMALL) is
determined by the low characteristics. The
measurement results may vary, depending on the
position of the optimizer microphone and speakers,
and the shape of the room. It is recommended that
you follow the measurement results. However, you
can change those settings in the Speaker settings
menu. Save the measurement results first, then try to
change the settings if you want.
47 GB