Trig Out - Fluke 8588A Operator's Manual

8588A/8558A
Operators Manual

TRIG OUT

Many applications benefit from synchronizing the Product readings to other
external equipment. You can program the Product to output a TTL-compatible
signal on its Trigger Out (TRIG OUT) BNC connector when a specified reading
event occurs. The TRIG OUT signal is comparable to the HP/Agilent/Keysight
3458A EXTOUT signal. See Tables 17 and 18.
Push , and then  (Output Signal) to configure the TRIG OUT
reading event. See the screen below.
80
i004.png