More; Capacitance (8588A Only) - Fluke 8588A Operator's Manual

8588A/8558A
Operators Manual

More

Push  to access these functions:
•
•
•
•
•
After you push  (More), DCI Ext Shunt is made available by
. Push  (More) additional times to cycle the choices
again starting with (Capacitance).

Capacitance (8588A only)

To avoid possible damage to the Product or to the equipment
under test, disconnect circuit power and discharge all high-
voltage capacitors before you measure capacitance. Use the DC
Voltage function to confirm that the capacitor is discharged.
Push  and then  (Capacitance) to use the Capacitance Measure
function. This function provides 2-wire measurements that use the V INPUT HI
and LO input terminals. With polarized capacitors, connect the positive side to
LO and the negative side to HI (VΩ|) as shown in Figure 13.
48
 (Capacitance)
 (RF Power)
 (Frequency)
 (DCI Ext Shunt)
 (More) opens these additional functions:
o  (ACI Ext Shunt)
o  (PRT)
o  (Thermocouple)
Figure 13. Connection for Capacitance
Note
WCaution
iei188.png