Learning The Commands Of Your Components - Sony STR-DE895 Operating Instructions Manual

Programming the remote (continued)
To control a TV
Maker
SONY
DAEWOO
FISHER
GOLDSTAR
GRUNDIG
HITACHI
JVC
MAGNAVOX
MITSUBISHI/MGA
NEC
PANASONIC
PHILIPS
PIONEER
RCA/PROSCAN
SAMSUNG
SANYO
SHARP
TOSHIBA
ZENITH
To control a satellite tuner or cable
box
Maker
SONY
JERROLD/G.I.
PANASONIC
RCA
S. ATLANTA
GB
64
Code(s)
501, 502
515, 544
508
503, 515, 534, 544
534
515, 544
516
503, 518, 544
503, 544
503, 544
509, 524
515, 518
509, 525, 526, 540
510, 527, 528, 529, 544
503, 515, 531, 532, 533,
534, 544
508, 545, 546, 547
535
535, 540
542, 543
Code(s)
801, 802, 803, 804
806, 807, 808, 809, 810,
811, 812, 813, 814
818
805, 819
815, 816, 817
Learning the commands
of your components
By using the Learning function, it is possible
for this remote to perform learned commands.
Setting remote control codes that
are not stored in the remote
When a remote control code is not one of the
presets stored in the remote, it is possible for
the remote to learn the code using the Learning
function.
1
Press TV ?/1 while pressing down USE
MODE.
The indicator lights and LEARN appears in
the display.
2
Push the scroll key/PUSH towards v or
V to select the input selector (including
TV ?/1) for the component you want to
control.
For example, if you are going to learn an
operation for a CD player, select CD/
SACD.
3
Press PUSH.
4
Press the button you want to use for
the Learning function.
The indicator turns off while a valid button
is pressed, then blinks slowly.
5
Point the remote control code receiver
section of the remote towards the
receiver/transmitter on the remote
control to be learned.
5-10 cm