Specifications - Sony STR-DE895 Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output (Models of area code
U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
1)
FRONT :
1)
CENTER :
1)
SURR :
1)
SURR BACK :
(8 ohms 1 kHz, THD 0.7 %)
1)
FRONT :
1)
CENTER :
1)
SURR :
1)
SURR BACK :
Models of area code E2/E3, MX
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
Reference Power Output
(8 ohms 1 kHz, THD 10 %)
1)
FRONT :
1)
CENTER :
1)
SURR :
1)
SURR BACK :
GB
70
100 W + 100 W
100 W/ch
100 W
100 W/ch
3) 4)
100 W/ch or 100 W
110 W/ch
110 W
110 W/ch
3) 4)
110 W/ch or 110 W
2)
110 W + 110 W
2)
130 W/ch
130 W
130 W/ch
3) 4)
130 W/ch or 130 W
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code
E2/E3
3) STR-DE995 only.
4) STR-DE895 only.
Frequency response
PHONO
MULTI CH IN (1, 2),
CD/SACD, TV/SAT,
MD/TAPE, DVD,
VIDEO 1, 2, 3
Inputs (Analog)
PHONO
MULTI CH IN (1, 2),
CD/SACD, TV/SAT,
MD/TAPE, DVD,
VIDEO 1, 2, 3
5) INPUT SHORT (with sound field and equalizer
bypassed).
6) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial)
TV/SAT, CD/SACD,
MD/TAPE, VIDEO 3
(Optical)
Outputs (Analog)
MD/TAPE (OUT),
VIDEO 1, 2
(AUDIO OUT)
SUB WOOFER
Outputs (Digital)
MD/TAPE (Optical)
EQUALIZER
Gain levels:
Power requirements
240 V AC, 50 Hz
RIAA equalization curve
±0.5 dB
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Sensitivity: 8 mV
Impedance: 50 kilohms
5) 6)
S/N : 86 dB (A, 8 mV )
Sensitivity: 500 mV
Impedance: 50 kilohms
S/N 5) : 96 dB
6)
(A, 500 mV )
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Voltage: 500 mV
Impedance: 10 kilohms
Voltage: 2 V
Impedance: 1 kilohms
Sensitivity: –
±10 dB, 0.5 dB step