Changing The Command Mode Of The Receiver - Sony STR-DE895 Operating Instructions Manual

x OSD horizontal position (OSD H.POSI
[XX]) (STR-DE995 only)
Lets you adjust the position of the on-screen
display horizontally.
x OSD vertical position (OSD V.POSI
[XX]) (STR-DE995 only)
Lets you adjust the position of the on-screen
display vertically.
x Digital assign (DIGITAL ASSIGN?)
Lets you assign an INPUT SELECTOR's
digital input to another INPUT SELECTOR
with only analog input. You can make the
following digital assignment.
Digital inputs INPUT SELECTOR that
(assignable) can be assigned to
DVD COAXIAL DVD, VIDEO 1, VIDEO 2
TV/SAT OPTICAL TV/SAT, VIDEO 1,
VIDEO 2
MD/TAPE OPTICAL MD/TAPE, VIDEO 1,
VIDEO 2
CD/SACD OPTICAL CD/SACD, VIDEO 1,
VIDEO 2
VIDEO 3 OPTICAL VIDEO 3, VIDEO 1,
VIDEO 2
For example, if you want to assign TV/SAT
OPTICAL's digital input to VIDEO 1, select
"TV/SAT t VIDEO 1". Otherwise, select "TV/SAT
t TV/SAT".
Changing the command
mode of the receiver
This function is useful when you use 2 Sony
receivers in the same room.
1
Turn off the receiver.
2
Hold down ENTER and press ?/1 to
turn on the receiver.
"COM MODE [AVX]" appears in the
display. Each time you repeat the procedure
above, the display changes as follows:
COM MODE [AV1] y COM MODE
[AV2]
Tip
The initial setting is "COM MODE [AV2]".
Notes
• The initial setting for the command mode of the
supplied remote is "AV2".
• If the command mode of the receiver and the
remote is different, you cannot use the remote to
operate the receiver.
GB
43