Dvi- D Display Identification; Usb Plug Support; Ddc/Ci Support; Edid - Philips 190B9CS/00 Service Manual

In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability

3.9 DVI- D Display identification

In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
Use DDC-2B, DDC/CI, and EDID V1.3

3.10 USB Plug support

Connect the upstream port of the monitor to host PC's USB port via USB cable,
Then attach external device to the downstream port of the monitor.
Check if the device can work properly.

3.11 DDC/CI SUPPORT

1) Smart control software requirement
2) In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with Philips Smart
Control and Portrait Display Tune at least.

3.12 EDID

3.13 Hot-key definition

Monitor Controls Lock
Factory Mode
Demo mode for smart image
DDC/CI On/OFF for VISTA

3.14 Smart Bright --Dynamic Brightness Control (DBC) (Not required for this product)

DCR controlled by Scalar
DCR function ON, contrast

3.15 Smart contrast (Dynamic contrast ratio)

Smart Contrast is a kind of dynamic backlight control.
This function changes the panel backlight dynamically according to the frame brightness histogram.
The contrast ratio is 8000:1 (typical). Suppliers to input actual measurement data

3.16 Smart image

3.16.1 Smart Image OSD outlook
Key
Menu/Enter
AUTO+Menu+Power On
Smart Image Key
MENU+DOWN
≧ 2 X original contrast specification
Smart Image
Office Work
Image Viewing
Entertainment
Economy
Off
HUDSON 9
Key Press Time
6 sec (lock/unlock)
Keep pressing when power on
3 sec (Enter/Quit)
6 sec (lock/unlock)
83
OSD Timeout
3 sec
3 sec