Manually Selecting The Frequency - Manual Tuning - Sony ICF-SW7600GR Operating Instructions Manual

Manually selecting the
frequency
— Manual tuning
Use – ?K, k? + or K – , + k to change the frequency.
3
1
Press POWER ON/OFF to turn on the radio.
2
Press FM/AM to select either band.
To listen to SW, MW or LW broadcasts, select AM.
3
For AM bands, hold down AM BAND and press – ?K
or k? + to select MW (medium wave), LW (long wave)
or meter band (short wave).
The lowest frequency of the band (meter
band) will appear in the display each time
the button is pressed.
For FM, skip this step.
4
Press – ?K, k? + or K – , + k repeatedly to tune in to
the desired station.
The frequency changes in the channel steps shown below each
time the button is pressed, and the "
station is tuned in.
Band
FM
SW
MW
LW
18 GB
Listening to the radio
When outer – ?K or k? +
is pressed
0.05 MHz
5 kHz
9 kHz or 10 kHz
9 kHz
1
2
4
3, 4
TUNE " appears when a
When inner K – or + k
is pressed
0.05 MHz
1 kHz
1 kHz
1 kHz