Waking Up To The Radio Or Alarm - Standby Function - Sony ICF-SW7600GR Operating Instructions Manual

Waking up to the radio or alarm
(continued)
Waking up to the alarm
If STANDBY MEMORY
the alarm sounds at the standby time. Erase if a frequency is preset.
2
3
1
Press POWER ON/OFF to turn on the radio.
2
Press STANDBY MEMORY
The preset station is received.
If no frequency is stored, two short beeps sound, "- - - -" appears in
the display and the unit will return to the previous condition.
Proceed to Step 4.
3
Hold down ERASE.
The preset number display flashes while ERASE is held down.
Two short beeps sound after about 3 seconds and the stored station
is erased. The "a" or "b" indicator will be cleared from the display.
4
Follow Step 4 and after of "Waking up to the radio",
page 28 to set the standby time.
The alarm sounds at the standby time and stops after about 3
minutes.
To stop the alarm
Press any button on the front.
Notes
• The alarm volume cannot be adjusted with the VOLUME control.
• If the standby time is reached when listening to the radio, the radio is
turned off and switched to the clock display, and the alarm is sounded.
30 GB
Using the timer
or without a frequency preset is activated,
or
— Standby function
1
.