Using The Video Or Other Unit - Sony DAV-SA30 Operating Instructions Manual

Controlling the TV
You can control your TV using the buttons
below.
By pressing You can
TV [/1
Turn the TV on or off.
TV/VIDEO Switch the TV's input source
between the TV and other input
sources.
Button TV
1~9, Selects the TV Channels.
10/0 (1-10 CH)
.
TV CH –*
>
TV CH +*
3
VOL +
# VOL –
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
* Use for selecting the channel number greater than
10.
Tip
Depending on the TV manufacture, the following
method also works. Press >10, then the number. (For
example, for channel 25, press >10, then 2 and 5.)
Using the Video or Other
Unit
You can use VCRs or other units connected to
the VIDEO 1 or VIDEO 2 jacks. Refer to the
operation manual supplied with the unit for
further information on the operation.
1 2
4 5
7 8
> 10
10/0
Press FUNCTION repeatedly until VIDEO 1
or VIDEO 2 that you connected the unit to
appears in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
TUNER FM t TUNER AM t VIDEO 1 t
VIDEO 2 t DVD t TUNER FM...
3
6
FUNCTION
9
GB
53