Listening To The Radio - Sony DAV-SA30 Operating Instructions Manual

To change the AM tuning interval
(except for Middle Eastern
model)
The AM tuning interval can be set to either
9 kHz (default) or 10 kHz (for some areas).
To change the AM tuning interval, tune in any
AM station first, then turn off the system by
pressing "/1 on the remote or press "/1 on the
system. While holding down FUNCTION (on
the system), turn on the power by pressing "/1
on the system. When you change the interval,
AM preset stations will be erased.
To reset the interval, repeat the same procedure.

Listening to the Radio

Preset radio stations in the system's memory
first (see "Presetting Radio Stations" on
page 54).
DAV-SA35K
REPEAT/
FM MODE
1 2
4 5
7 8
> 10 10/0
PRESET
–/+
1
Press FUNCTION repeatedly until FM
or AM appears in the front panel
display.
The last received station is tuned in.
TITLE TRK ALBM
m
NTSC ALBM
PGM SHUF
MP3 PBC
SACD V CD
TITLE TRK ALBM
"/1
DISPLAY
3
6
FUNCTION
9
TUNER/
BAND
VOL +/–
TUNING –/+
x
CHAP HULTI DTS
kHz
MHz
SLEEP EFFECT
REP 1 ; DIGITAL
MONO PRO LOGIC
TUNED NIGHT DYNAMIC BASS
STEREO
CHAP HULTI DTS
kHz
MHz
2
Press PRESET + or – repeatedly to
select the preset station you want.
Each time you press the button, the system
tunes in one preset station.
Every time you press TUNER/BAND, the
band changes to AM or FM alternately.
3
Adjust the volume by pressing VOL
+/–.
To turn off the radio
Press "/1.
To listen to non-preset radio
stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or – on the
remote repeatedly.
For automatic tuning, press and hold TUNING
+ or – on the remote. Press x when you stop the
automatic tuning.
Tips
• If an FM program is noisy, press REPEAT/FM
MODE on the remote so that "MONO" appears in the
front panel display. There will be no stereo effect, but
the reception will improve. Press the button again to
restore the stereo effect.
• To improve reception, reorient the supplied aerials.
To check the frequency or sound
field
Press DISPLAY repeatedly.
Each time you press DISPLAY, the front panel
display changes as follows:
index name of the station* t frequency t
sound field t volume t index name of the
station...
* This is displayed when you have entered a
name for preset stations (page 56).
GB
55