Sony DAV-SA30 Operating Instructions Manual page 64

x LEVEL
You can vary the level of each speaker as
follows. Be sure to set "TEST TONE" to "ON"
for easy adjustment.
CENTER
0 dB
SURROUND
LEFT 0 dB
SURROUND
RIGHT 0 dB
SUBWOOFER
0 dB
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set "TEST
TONE" to "ON" for easy adjustment.
FRONT Adjusts the balance between the front left
CENTER
and right speakers. The center position is
shown as "---". (You can adjust from the
center 6 steps left or right.)
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press VOL +/–.
x TEST TONE
The speakers will emit a test tone to adjust
"LEVEL" and "BALANCE."
OFF
The test tone is not emitted from the
speakers.
ON The test tone is emitted from each speaker
in sequence while adjusting balance or
level. When you select one of the
"SPEAKER SETUP" items, the test tone is
emitted from both left and right speakers
simultaneously.
64 GB
Adjusts the level of the center
speaker (–6 dB to +6 dB, 1 dB
increments).
Adjusts the level of the surround
speakers (–6 dB to +6 dB, 1 dB
increments).
Adjusts the level of the subwoofer
(–6 dB to +6 dB, 1 dB increments).
Adjusting the speaker
balance and level
1
Press DVD SETUP in stop mode.
The Setup Display appears.
2
Press X or x repeatedly to select
"SPEAKER SETUP", then press
ENTER.
3
Press X or x repeatedly to select "TEST
TONE", then press ENTER.
4
Press X or x repeatedly to select "ON",
then press ENTER.
You will hear the test tone from each
speaker in sequence.
5
From your listening position, adjust the
value of "BALANCE" and "LEVEL"
using C/X/x/c.
The test tone is emitted from both left and
right speakers simultaneously.
6
Press ENTER when you have finished
making adjustments.
7
Press X or x repeatedly to select "TEST
TONE", then press ENTER.
8
Press X or x repeatedly to select
"OFF", then press ENTER.
Note
When you adjust the speaker settings, the sound cuts
off for a moment.
Tip
To adjust the balance or the level without
listening to the test tone, select "BALANCE" or
"LEVEL" in step 3 and press ENTER. Then
adjust the balance or level using X/x and press
ENTER.