Pre-Tensioner Seat Belt; Rear Center Seat Belt - Hyundai Verna Owner's Manual

Hide thumbs Also See for Verna:
Table of Contents

Advertisement

R R ear center seat belt
When using the rear center seat belt,
the buckle with the "CENTER" mark
must be used.
i
Information
If you are not able to pull out the safe-
ty belt from the retractor, firmly pull
the belt out and release it. After
release, you will be able to pull the belt
out smoothly.

Pre-tensioner seat belt

(Driver and front passenger)
OHCR036018
Your vehicle is equipped with driver's
and front passenger's Pre-tensioner
Seat Belts. The purpose of the pre-
tensioner is to make sure the seat
belts fit tightly against the occupant's
body in certain frontal collisions. The
pre-tensioner seat belts may be acti-
vated in crashes where the frontal col-
lision is severe enough, together with
the air bags.
When the vehicle stops suddenly, or
if the occupant tries to lean forward
too quickly, the seat belt retractor will
lock into position.
In certain frontal collisions, the pre-
tensioner will activate and pull the
seat belt into tighter contact against
the occupant's body.
Always wear your seat belt and
sit properly in your seat.
Do not use the seat belt if it is
loose or twisted. A loose or twist-
ed seat belt will not protect you
properly in an accident.
Do not place anything near the
OHCI037028R
buckle. This may adversely affect
the buckle and cause it to func-
tion improperly.
Always replace your pre-tension-
ers after activation or an acci-
dent.
NEVER inspect, service, repair or
replace the pre-tensioners your-
self. This must be done by an
authorized HYUNDAI dealer.
Do not hit the seat belt assem-
blies.
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents