Height Adjustment; To Release Your Seat Belt - Hyundai Verna Owner's Manual

(Continued)
•
Position one arm under the shoul-
der belt and the other over the belt,
as shown in the illustration.
•
Always position the shoulder
belt anchor into locked position
at the appropriate height.
•
Never position the shoulder belt
across your neck or face.

Height adjustment

You can adjust the height of the
shoulder belt anchor to one of the
four different positions for maximum
comfort and safety.
The shoulder portion should be
adjusted so it lies across your chest
and midway over your shoulder near-
est the door, not over your neck.
n
Front seat
To adjust the height of the seat belt
anchor, lower or raise the height
adjuster into an appropriate position.
To raise the height adjuster, pull it up
(1). To lower it, push it down (3) while
pressing the height adjuster button (2).
Release the button to lock the anchor
into position. Try sliding the height
adjuster to make sure that it has
locked into position.
OYC036014

To release your seat belt:

Press the release button (1) in the
locking buckle.
When it is released, the belt should
automatically draw back into the
retractor. If this does not happen,
check the belt to be sure it is not twist-
ed, then try again.
ODH033057