Cooktop Frame - GE JP348 Use And Care Manual

Proper care and cleaning are important so your
halogen/radiant cooktop will give you efficient
and satisfactory service. If soil, mineral deposits
from evaporated water spills or metal rub-off from
aluminum cookware is not removed, it will burn
on the glass cooktop surface and cause permanent
discoloration.
Control Knobs
The control knobs may be removed for easier
cleaning.
Before removing the knobs for cleaning, please
note that the knobs are in the proper OFF position.
When replacing the knobs, check the OFF position
to insure proper placement.
The knob stem has a groove in each side. The groove
on one side has a spring clip. The other groove is
clear (see illustration). When removing the knob,
it may be helpful to slip a thin cloth (such as a
handkerchief> or a piece of string under and around
the knob edge and pull up. Check the inside of the
knob and find the molded rib.
Wash the knobs in soap and water or a vinegar and
lot water solution but do not soak.
Replace the knob by fitting the molded rib inside
the knob into the clear groove on the stem.

Cooktop Frame

Use the same cleaning methods as those described for the glass ceramic top
with the exception of using a scraper. Do not scrape the frame as this will
damage the metal surface.
Follow these directions carefully in caring for your
cooktop to assure safe and proper maintenance.
Be sure that the surface unit control knobs are
turned off and that the entire cooktop is cool
before cleaning. Do not use a cooktop cleaner on
a hot cooktop. The fumes can be hazardous to your
health and can chemically attack the glass surface.
Clear Groove
in Stem