Sony 3-289-204-41(1) Operating Instructions Manual page 43

4
Press V/v repeatedly to select
"Speaker Impedance", then
or b.
press
5
Press V/v repeatedly to select
"4 ohms" or "8 ohms"
depending on the speakers you
are using, then press
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
• When you connect all speakers with a normal
impedance of 8 ohms or higher, set "Speaker
Impedance" to "8 ohms". When connecting other
types of speakers, set it to "4 ohms".
• When you connect front speakers to both the
SPEAKERS A and B terminals, connect the
speakers with a normal impedance of 8 ohms or
higher.
– When you connect speakers with impedance of
16 ohms or higher in both "A" and "B"
configuration:
Set "Speaker Impedance" to "8 ohms" in the
Speaker settings menu.
– For other types of speakers in other
configurations:
Set "Speaker Impedance" to "4 ohms" in the
.
Speaker settings menu.
GB
43