Amplifier Operations; Settings For The Audio (Audio Settings Menu) - Sony 3-289-204-41(1) Operating Instructions Manual

Amplifier Operations

Settings for the audio
(Audio settings menu)
You can use the Audio settings menu to make
settings for the audio to suit your preference.
Select "Audio" in the Settings menu. For
details on adjusting the parameters, see "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 39).
Audio settings menu parameters
x A/V Sync
(Synchronizes audio and video
output)
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display. You can adjust the delay from 0 ms to
300 ms in 10 ms steps.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• This parameter is not valid when
– the multi channel input is selected.
– "Analog Direct" is being used.
x Dual Mono
(Digital broadcast language
selection)
Lets you select the language you want to listen
to during a digital broadcast. This feature only
functions for Dolby Digital sources.
• Main/Sub
Sound of the main language will be output
through the front left speaker, and sound of
the sub language will be output through the
front right speaker simultaneously.
• Main
Sound of the main language will be output.
• Sub
Sound of the sub language will be output.
GB
56
x Decode Priority
(Digital audio input decoding
priority)
Lets you specify the input mode for the digital
signal input to the HDMI IN jacks.
• PCM
When signals from the HDMI IN jack are
selected, only PCM signals are output from
the connected player. To prevent interruption
when playback starts, set to "PCM". When
signals in any other format are received, set
this item to "AUTO".
• AUTO
Automatically switches the input mode
between Dolby Digital, DTS or PCM.
Note
Even when "Decode Priority" is set to "PCM", the
sound may be interrupted at the very beginning of
the first track depending on the CD being played
back.