Using Your Dashboard Camera - Motorola MDC100 Quick Start Manual

3. Using your dashboard camera

• The purpose of your dashboard camera is to
continuously record the road ahead and to
automatically record and save any incidents or
accidents you might be involved in. The status LED
(Blue) will flash when it is recording.
• Your device records video in clusters of up to 3
minutes. The duration can be changed in video
settings, see 4.2 Video Settings in the User's
Guide. It is equipped with a sensor that detects
shocks. Each time a shock is detected, it will save
the cluster during which the event occurred to the
SD card. The sensitivity of the sensor can be
changed in the video settings screen, see section 4
in the User's Guide.
• Once the memory of your SD card is full, it will
automatically overwrite the oldest footages in
which no event has been detected. Your
dashboard camera will save a maximum of 20
sensor triggered footages. When it reaches 20, it
will start deleting old recorded footages on a first in
first out basis. The actual number of files that can be
recorded depends on the SD card capacity.
Using your dashboard camera 7