JVC Connected Cam GY-HC550E Instructions Manual page 38

Y Zoom Display
Displays the zoom position. (Zoom bar or
0
value)
Dynamic Zoom Off:
.
Dynamic Zoom On:
.
The zoom bar will only be displayed for 3
0
seconds after the zoom operation is
activated.
The value will always be displayed.
0
When [Digital Extender] is configured to "On",
0
"F" is displayed to the right of the zoom
display.
Memo :
The mode of display (value or bar) can be
0
configured in [LCD/VF] B [Display Type] B
[Zoom].
Z Network Connection Icon
The network connection status is displayed.
Icon
Wireless LAN connection from the
host terminal (USB) is established
.
Wired LAN connection from the
host terminal (USB) is established
.
Cellular adapter connection from
the host terminal (USB) is
established
.
When a USB adapter different
from the connection settings is
detected
.
Built-in wireless LAN connection is
established
A
.
LAN terminal connection is
established
.
When an unusable USB
0
(No adapter is detected
display) When the LAN cable is not
0
connected
Memo :
Yellow display indicates preparation for
0
connection in progress.
38
Display Screen in Camera Mode
Status
a Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data.
Example of time code display:
0
Display Screen
0 0 : 0 0 : 0 0 : 0 0
*
.
* Colon (:) denotes non-drop frames and dot
(.) denotes drop frames.
Example of user's bit display:
0
Display Screen
F F E E DD 2 0
.
Memo :
Use [LCD/VF] B [Display Type] B [TC/UB] to
0
toggle between the time code display and user's
bit display.
b Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
c IFB/RET Mark
Displays the status of the IFB or Return over IP.
Icon
During audio feed only
.
When an error occurs during
audio feed only
.
(Yellow)
During video+audio feed
.
When an error occurs during
video+audio feed
.
(Yellow)
Status