Never place the baby monitor in the child’s crib or playpen. BE9026 contact mat Technical specifications In the box Dimensions and weight Environment BE1491 Visit baby monitor Height: 100 mm, 4.0" For indoor use only Operating temperature 1.5 V AA alkaline batteries...
Page 2
Visit baby monitor Setting up the baby monitor Remove the battery pull tab to start the unit. (You can press and hold both test buttons for 3 seconds to turn it on/off.) Place the baby monitor on the bedside table or mount it on the wall using the supplied screw and plug. The recommended distance is 0.5 –...
Page 3
Visit baby monitor Adjusting the settings The buttons for sensitivity and delay are located on the left side of the baby monitor. When you press the button, the corresponding LED colour shows the current setting. Then press repeatedly to adjust the setting. If the baby monitor is not activated when the baby cries –...
Visit baby monitor Changing the radio key If your Visit system is activated for no reason, there is probably a nearby system that triggers yours. In order to avoid radio interference, you need to change the radio key on all units. The radio key switches are located under the monitor cover. Here is how you change the radio key: Carefully remove the table stand and open the front cover on the baby monitor.