Getting Started; Unpacking; Hookup Overview - Sony TA-VE700 Operating Instructions Manual

Getting Started

Unpacking

Check that you received the following items with the
amplifier:
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
Inserting batteries into the remote
Insert two size AA (R6) batteries with the + and – on
the battery compartment. When using the remote,
point it at the remote sensor g on the amplifier.
When to replace batteries
Under normal use, the batteries should last for about 6
months. When the remote no longer operates the
amplifier, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
4 EN

Hookup Overview

The amplifier allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the amplifier on the pages specified. To
learn the locations and names of each jacks, see "Rear
Panel Descriptions" on page 20.
Speaker TV/VCR Hookups (6, 7)
System
Hookups (5, 6)
TV
Front
VCR
speaker
(L)
LD player
Rear
CD player
speaker
(L)
Tuner
Tape/MD deck
Turntable
Audio Component
Hookups (5)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the mains leads until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.
Front
speaker
Active
(R)
woofer
Rear
Centre
speaker
speaker
(R)
Video camera
recorder
Video game
TV/VCR Hookups
(6, 7)