Hold Button; Count-Up Timer / Stopwatch Feature - Bonavita Interurban Series User Manual

your kettle off of the base to reset. To select a new temperature follow instructions
in Preset Temps Button or Setting Temperature Manually. In addition, the previous
temperature set point used on the kettle does not affect the boil temperature.

HOLD BUTTON

The Hold Button allows the kettle to reach and maintain set temperature for up to
one hour. This is an optional feature.
1. Press the Power Button and the LED surrounding the button will illuminate. Then
select the temperature set point using Manually Setting Temperature directions.
2. Press the Hold Button and the LED around the Hold Button will illuminate.
3. When set temperature is reached the heater will turn off and on as needed to
maintain set temperature.
4. When you lift kettle to pour and return to the base, the Hold Button must be
pressed again if you want to continue the hold temperature function. If you don't
press the Hold Button after returning the kettle to the base, the display will show
current water temperature for 7 minutes and the unit will proceed to power off.
Please note: The hold function is disabled when the boil button is in use.

COUNT-UP TIMER / STOPWATCH FEATURE

When you lift the kettle, the LCD display will show a count-up timer / stopwatch.
The first number indicates the minutes, and the last two numbers indicate the
seconds (the maximum count time is 7 minutes). Press the + button to start the
timer. Set the kettle back on the base and lift back off to reset timer to zero.
12