www.prolon.net
POWER SOURCE & NETWORK
The M1000 controller is powered by the HVAC equipment's 24 VAC power supply by connecting the
common (''C'' wire) to the "COM" pin and the live (''R'' wire) to the "24 VAC" pin (see Figure 11). The
common for all inputs and outputs is the same as the power source's common. All output power
sources also originate from the HVAC equipment's power source.
The ProLon M1000 Heatpump controller is designed to work with the VC1000 zone slaves. When
they are networked, the Master and slaves all communicate in real-time. The network connections
are made using the network pins located on the M1000 controller (see Figure 12).
info@prolon.net
www.prolon.net
HEATPUMP HARDWARE GUIDE
Power Source
24VAC
Figure 11: Connecting the 24VAC power source
Network Communication
Figure 12: Connecting to the network
1-877-9PROLON
PL-M1000 SERIES
( R )
To HVAC equipment
terminal
( C )
(A)
Towards
network
(B)
TEL:(450) 973-7765 FAX: (450) 973-6186
16
Montréal
1989 rue Michelin Laval,
QC H7L 5B7
1-800-461-1381